Landfill Hydrology

How much leachate a landfill makes, and where the water goes, comes down to a water balance at the surface and inside the waste.

The water balance

At its simplest, percolation into the waste equals precipitation minus runoff, evapotranspiration and the change in soil-water storage. Inside the waste, absorption until field capacity is reached delays leachate production; once the waste is wet, much of the percolation becomes leachate.

Leachate generation over a landfill’s life

  • Active filling: open cells receive direct rainfall; daily and intermediate cover and stormwater separation matter most.
  • After closure: a final cover with a barrier layer and vegetated soil sharply reduces infiltration, and leachate flow declines over years.
  • Bioreactor operations deliberately recirculate leachate to speed decomposition, which changes the balance.

Modeling tools

The US EPA’s HELP model (Hydrologic Evaluation of Landfill Performance) is a quasi-two-dimensional water-balance model widely used for comparing cover and liner designs and estimating leachate volumes. Numerical unsaturated-flow models solve Richards’ equation for more detailed analyses, such as water-balance covers, transient pore pressures or layered systems.

Below the liner

Pore pressures in the soils beneath a liner can come from the regional groundwater table, perched water, consolidation of underlying soils under the weight of waste, or leakage. Separating these causes requires piezometer data, regional groundwater records and modeling. It matters because uplift pressures affect liner stability, and wrongly attributing water to leakage, or failing to detect leakage, leads to bad decisions.

Final covers

Covers range from prescriptive composite caps to evapotranspirative (water-balance) covers, which store water in thick soil and release it by plant transpiration. In semi-arid climates ET covers can match conventional caps; in humid climates they need careful evaluation.

Keep learning

Glossary